IMPORTANT NOTE: Xecuter have allowed us a small amount of stock without the conductive glue that will be included with the Probe v2 ! So all those of you who can simply repair the trace cut with your own glue or solder can now get your hands on one of these. But hurry the stock is very limited.

Another bonus for the delay is that Xecuter improved the design by adding a MULTI-R switch (some Liteon drives will not read the firmware with a 20 Ohms resistor, but will only work with an 18 Ohms or 22 Ohms resistor - so now you can choose between all three ! - they have also added extra support for the Liteon Windbond IC that other products have problems with. Of course as usual, Xecuter products have none of these problems :)

– the CK3 Probe v2.

This is targeted to installers who require a multi-use no solder* solution to the new Liteon drives – or to the users who simply don’t have the skills to solder the cheaper Xecuter LT Switch alternative. Still retaining the original CK3 Probe function of dumping the 74850 key (the only product to date to have both original Probe v1 and Probe v2 LT Switch functions in the same device), but now also enabling full firmware access of the new 83850V2 and 93450 drives – you can easily switch between PROBE and LT Switch Modes.

A complete all-in-one solderless* solution ! Installers can use this again and again and again and again – No rebuild boards – No soldering* – NO PROBLEM !

The CK3 Probe 2 connects to both the CK3 Lite and CK3 Pro connectivity kits and includes full status LED’s and an extra protection circuit against accidental shortages on the DVD PCB.

•The First No-Solder Solution For ALL Liteon Drives including no trace cut for Liteon 74850 !
•Original CK3 Probe Function (Liteon 74850 DVD Key) - No Trace Cutting !
•New No-Solder LT Switch Probes (Liteon 83850V2 & Liteon 93450) - Small PCB Trace Cuts - Repaired With Special Conductive Glue
•New ©MULTI-R Feature !
•Improved Liteon Winbond Chipset Support
•Power / Status / Standby LED's
•New Protection Circuit To Protect Against Accidental Shortages (LED Permanent On Syndrome)
•Fits to CK3 Lite and CK3 Pro

* The special conductive glue for no-soldering feature will be available seperatley. Stocks are expected at the end of April.